Description du produit
Modèle NO .: G46J-10C-DN40 Raccordement: membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane à membrane. , TS, SGS Code SH: 8481804090 Actionneur: Manuel Matériau: Fonte Pression: Fonction de pression ordinaire: Electrovanne, Type électronique, Type intelligent, bus de terrain Standard: DIN, GB, ANSI, BSW Étanchéité: Caoutchouc Marque déposée: ZY Origine: Chine Vannes de diaphragme à lame à motif droit
1) Matériau du corps: fonte ou acier inoxydable 316L (moulage d'investissement)
2) Pression maximale: 10bar (diaphragme est EPDM ou FPM), 6bar (le diaphragme est PTFE, un côté doit être utilisé))
3) Température de travail: EPDM (-40 ~ + 130 degrés), EPDM + PTFE (-5 ~ + 160 degrés)
4) Standard: DIN, 3A, SMS, ISO / IDF, BS / RJT, ASME / BPE etc.
5) Raccordement: Serrage, soudé, à bride, prise de soudure, Vis (NPT, BSP) peuvent être choisis.
6) Matériau du joint: EPDM + PTFE FDA: 177.26600 /
7) Taille: DN8-DN100
8) Puissance: actionneur pneumatique (actionneur en plastique / acier inoxydable) / poignée
9) Voie de conduite: pneumatique, normalement fermée (1), normalement ouverte (2) et double direction (3)
10) Pression de commande: 4-6 bar (mode de contrôle 1), 3-4 bar (mode de contrôle 2 et 3)
Technical Data
|
Material
|
Contact with the product components
|
Investment casting316L(1.4409)
|
Can provide material inspection report
|
Materal no contact with the product components
|
304(1.4301)
|
Sealing material
|
Standard
|
EPDM+PTFE
|
Adopt sealing material with all the seal material the FDA 117.2600
|
Option
|
EPDM
|
Pressure
|
Pressure of work
|
16 bar
|
Control air pressure
|
5-8 bar
|
Temperature
|
Working temperature
|
EPDM(-40 ~+130 degree), EPDM+PTFE(-5~+160degree)
|
Surface treatment
|
Inside surface treatment
|
Ra≥0.4-0.8μm
|
|
Surface treatment
|
Sand blasket
|
|
Connection
|
The diameter welding
|
DIN11850-2,DIN11850-1,3A,SMS,ISO,IDF,BS,BPE....
|
Connection mode:
|
weld, triclamp,flange,wled socket,screw etc
|
Body mode
|
Straight ,T type, U type, L type,Multi type can be chosen
|
Optional driven
|
Brainpower
|
Pneumatic control
|
Pleastic actuator and stainless steel actuator
|
Manual handle mode
|
ABS or stainless steel handle
|
Groupes de Produits : Valve GB